Shock mount for digital recorders
Posted 31 July 2010 - 08:19 AM
It might be a bit on the pricey side, however, I think that it would prove invaluable in killing all case noise. Today's more sensitive linear PCM recorders are very susceptible to case handling noise and should remain stationary during recording. However when exploring supposed haunted locales, we do not always have the luxury of stationary recording. This solution looks like it would work in may different scenarios. If you have ever held and h2 or similar recorder while walking with the gain turned up, you know how tortuous it can be to listen to the audio later. As the case is handled, every tap, bump, and finger slide is picked up at ear-splitting levels. Case handling noise is also a culprit for false positive evp's. Just brushing the case of the recorder can generate sounds that sound like muffled voices. The less contact the case has with your hand, the better. You do not have to spend a fortune, either. You can make a similar device out of pegs and rubber bands, and in doing so, add another facet of integrity to your audio data.
Posted 31 July 2010 - 12:12 PM
I will still dispute the one statement that However when exploring supposed haunted locales, we do not always have the luxury of stationary recording.
I would ontend that if this is the case the protocols regarding the session need reworked to where it becomes possible to keep the equipment stationary. The suspension of the recorder, while lowering some extraneous noise sources cannot eliminate all of them. You stil have those generated by the person themselves, clothing sounds, stomach noises, creaky floors, air movement, in some cases where extreme gain is used with quality equipment, even the person's own heartbeat can be detected. No form of suspension can do anything to minimize there types of sounds. Thus I stand by the recommendation that the area where a recording is being done should remain unoccupied (except if communication is being attempted.) The recorder should be several feet minimum from ANY person while recording is being done.
Visit my website
Posted 01 August 2010 - 02:01 PM
Posted 15 September 2010 - 11:00 AM
I also made my own "Dead Cat" to fit on the recorder or external mic to eleiminate any wind noise.
Posted 17 September 2010 - 12:40 AM
Ultimately I want to feed a pair of R0de Nt-1a's (approx 5db self noise) in a 120 degree pattern but that setup will certainly be anything but simple or mobile.
Posted 10 September 2011 - 05:47 AM
Just a thought
Posted 11 September 2011 - 08:44 AM
Visit my website
Posted 15 September 2011 - 12:21 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users